Squirt Sealant with BeadBlock Granules is a good all year-round tyre sealant that will not dry out prematurely or permit the tyre walls to stick together. The liquid solution is suitable for sealing puncture holes up to 3mm without the BeadBlock kernels or 6mm with them.

Squirt Sealant is a blend of non-hazardous (according to EEC criteria) constituents which include ammonia-free water-based latex and components which prevent freezing and inhibit premature drying out. It contains pH stabilisers, corrosion inhibitors and preservatives. It also contains natural microfibres, which are suspended in the formulation and ceramic kernels are further added to increase the seal-ability of the solution.

Application with BeadBlock particles (will seal puncture up to 6mm) 1. Deflate tyre and remove one side from rim. 2. Shake bottle well and remove tamper seal. 3. Pour prescribed amount of sealant into tyre immediately after shaking. 4. Unscrew cap from BeadBlock particle bottle. Fill this cap halfway and add particles directly into tyre. 5. Secure the tyre on the rim. 6. Rotate wheel until valve stem is at the top (Extreme cold blast from a CO2 cartridge directly into sealant if valve is at the bottom may cause local sealant solidification). 7. Inflate tyre to correct pressure to seat bead and keep inflated to manufacturer's specifications.